Life's Dirty. Clean Easy.

Top 2024 Wet & Forget Shower FAQs

By Wet & Forget
wet and forget shower questions

Ridding your bathroom of soap scum and mildew stains is easy with Wet & Forget Shower. To help you see just how our weekly shower spray can spruce up your bathroom surfaces, we’ve compiled some Wet & Forget Shower FAQs.

Still have questions? Contact us through this link.

How to Use Wet & Forget Shower?

Applying Wet & Forget Shower is easy.

After your last shower of the day, spray down all shower surfaces. Before the first shower the next day, rinse off surfaces.

For best results, let the spray work for around eight to 12 hours (but no more than 24 hours) before rinsing surfaces. Repeat weekly.

If the shower surfaces have a heavy build-up of soap scum, shower grime, or mold and mildew stains, apply daily until surfaces are clean. Then resume weekly applications.

There’s no need to scrub or wipe. Just spray today and rinse tomorrow!

How to Clean Glass Shower Doors and Shower Curtains?

Wet & Forget removes hard water stains from shower glass.

Wet & Forget Shower is a shower glass door cleaner, shower curtain cleaner, and overall bathroom surface cleaner. That is, it’s safe to use on glass, plexiglass, vinyl, rubber, nylon, and plastic.

To apply, spray your shower door or curtain after the last shower of the day. Rinse the door or curtain with water before the first use of the shower the next day.

Wet & Forget Shower works best when allowed to sit undisturbed for eight to 12 hours. If the door or curtain is especially grimy, you may need to apply the spray daily before resuming weekly applications.

How to Clean a Tub?

A spotless tub is possible with Wet & Forget Shower

Wet & Forget Shower makes cleaning tubs a cinch. It’s safe to use on virtually any bath surface:

  • Acrylic
  • Fiberglass
  • Glass tile
  • Granite
  • Porcelain
  • Stone

To use Wet & Forget Shower on your tub, simply spray the bath surfaces and let sit for eight to 12 hours. Then rinse with water.

If your tub is dealing with a heavy build-up of soap scum or grime, apply daily until surfaces are clean. Otherwise, apply the spray weekly to keep your tub clean.

There’s no need to scrub or wipe. And the extendable, flexible trigger sprayer can help the spray reach far or awkward corners.

How to Remove Soap Scum from Glass and Other Surfaces?

Soap scum is a combination of water, minerals, soap talc, and body oils. It leaves a pesky chalky film on bathroom surfaces.

Removing soap scum from bathroom surfaces with Wet & Forget Shower at your side. It’s a potent soap scum cleaner with ingredients that dissolve soap scum and rid bathroom surfaces of body oils.

Simply spray Wet & Forget Shower wherever you see soap scum: showers, tubs, sinks, counters, and even washing machines. Let the spray sit for eight to 12 hours and then rinse with water.

Apply weekly to keep soap scum at bay. If your surfaces are especially scummy, use Wet & Forget Shower daily until the soap scum is gone, and then resume weekly applications.

What Bathroom Surfaces Does Wet & Forget Work On?

One FAQ: What surfaces does Wet & Forget clean? Answer: Almost all of them!

Wet & Forget Shower is safe to use on virtually every bathroom surface (except for natural marble). It contains no bleach, ammonia, or other harsh chemicals.

So, consider using Wet & Forget Shower on the following bathroom surfaces:

  • Acrylic
  • Brass
  • Bronze
  • Chrome
  • Cultured marble
  • Fiberglass
  • Glass tile
  • Granite
  • Porcelain
  • Shower doors (glass or plexiglass)
  • Shower tiles
  • Slate
  • Stainless steel
  • Stone
  • Vinyl

You’ll notice that some of these surfaces aren’t shower-exclusive. So, feel safe using Wet & Forget on other surfaces, like counters, sinks, washing machines, or practically anywhere soap scum is present.

When using Wet & Forget on places other than your shower, tub, or washing machine, only let the spray sit for a few moments before rinsing with water.

How to Attach Trigger Sprayer?

Wet & Forget Shower uses a flexible, extendible trigger sprayer that makes cleaning easy. No more awkward bending or sore muscles from trying to reach that distant bathroom corner.

To attach the trigger sprayer, follow these steps:

  1. Remove the sticker from the bottle flip cap.
  2. Open flip cap.
  3. Pull out the sprayer from its position tucked into the bottle’s handle.
  4. Extend the coiled hose inside the sprayer to its full length. (About 36 inches.)
  5. Firmly insert the red hose tip into the open flip cap until you hear it click into place.

Once attached, transport the bottle upright as leakage is possible through the cap’s breather hole. To store, tuck the sprayer back into its spot within the handle.

How Often Do I Need to Use Wet & Forget Shower

Wet & Forget Shower is a weekly shower cleaner. In most cases, a weekly application is all you need to keep soap scum, shower grime, and mold and mildew stains at bay.

If your bathroom surfaces have a heavy build-up of scum or grime, consider daily applications until surfaces are clean. Then resume weekly applications.

The 64-ounce bottle contains around 12 weeks of cleaning.

How Do I Use the Refill?

When your original bottle of Wet & Forget Shower runs out, you can refill it with Wet & Forget Shower Refill. It contains an additional 24 weeks of cleaning power and makes your bathroom cleaning effortless and economical.

The refill bottle comes without a sprayer attachment. To use it, carefully pour the contents into your original (and now empty) Wet & Forget Shower bottle.

Once you reattach the trigger sprayer, you’re ready to tackle soap scum and shower grime.

What Scents Are Available?

Wet & Forget Shower doesn’t contain harsh or irritating fumes. Instead, it comes in two subtle yet equally pleasing scents: vanilla and fresh. (Currently, our refill bottle only comes in the vanilla scent.)

Both aromas will leave your bathroom smelling clean without overwhelming your senses.

Is Wet & Forget Shower Septic System Safe?

Wet & Forget Shower is safe for septic systems. It will not affect or interfere with the aerobic and anaerobic bacteria in your septic tank.

Does Wet & Forget Shower Contain Bleach?

Wet & Forget Shower contains no bleach, ammonia, dyes, or irritating fumes. It was developed using soft chemistry and without harsh chemicals that can damage surfaces.

That means Wet & Forget Shower is safe to use on a wide range of bathroom surfaces, except for natural marble.

A clean shower is only a spray away.

We hope our Wet & Forget Shower FAQs help you learn more about our product. Pick up a bottle of our weekly shower spray cleaner (along with a refill) by heading online or to your local retailer.