Wet & Forget. Non-caustic. Non-acidic. No bleach. No pressure washing. No elbow grease.

For over 30 years, people all over the world with some of the biggest cleaning jobs (and the smallest) have been using Wet & Forget. It has been used on big jobs like the building exteriors at Sea World in Florida and small ones like restoring a historic bungalow. Wet & Forget removes moss, mold, mildew and algae stains gently over time from roofs, concrete, brick, siding, tennis courts, awnings, boat sails and wood decks without scrubbing or pressure washing. For your toughest outdoor cleaning jobs, apply some Wet & Forget...then forget it. To read more about Wet & Forget, check out our customer comments here.

How Wet & Forget Works

Wet & Forget’s gentle cleaning action takes time but won’t damage any exterior surface.

Just apply Wet & Forget to any exterior surface and forget about it. Mother Nature does the rest. The wind and rain gently clean the surface.

With a pH of 8, Wet & Forget is close to neutral. Most moss, mold, mildew and algae removal products are either highly acidic (pH 1) or highly caustic (pH 12.) Caustic or acidic products can damage the surface being cleaned. Wet & Forget is very gentle and safe to apply to any outdoor surface.

**For example, a product with a pH of 10 would be 100x more caustic than
Wet & Forget.

Where can you use Wet & Forget?

Concrete & Pavement – driveways, patios, retaining walls, sidewalks
Decks – composite, wood (natural, painted, stained), pre-treated lumber
Marine – canvas, fiberglass, inflatable dinghies, marinas, sails, teak decks
Roofs – asphalt & fiberglass shingles, clay & concrete tile, slate, steel
Siding – aluminum, brick, stucco, vinyl, wood

Asphalt (blacktop) Painted Surfaces
Aluminum Siding Patios
Awnings Patio Furniture/Umbrellas
Boats Plastic Houses
Bricks Pool Surrounds
Brick pavers Recreational Vehicles
Ceramic Retaining Walls
Concrete Roofing (all types)
Composite Decking Sails
Decks Sandstone
Driveways Shade Sails
Docks Sidewalks
Fences Siding (all types)
Fiberglass Shingles Stucco (all types)
Greenhouses Tennis courts
Gutters Teak Decks
Inflatable Dinghies Textured Finishes
Limestone Tile
Marble Tombstones
Natural Stone Vinyl Siding
Outdoor Furniture Wood
Outdoor Planters  

Application

Apply Wet & Forget with a garden sprayer. Dilute 1 part Wet & Forget to 5 parts water.

Wet & Forget Concentrate Fill Garden Sprayer With Water To
2 1/2 cups (20 oz.) 1 gallon mark
5 cups (40 oz.) 2 gallon mark

We recommend applying Wet & Forget to a dry surface in order to get the best penetration. Total saturation of the surface with Wet & Forget is essential to obtain good results with the moss, mold, mildew or algae stains. It's best applied on a cool dry day with no rain for four to five hours after application. Morning or evening is best. This will ensure that the surface being treated stays wet for an extended period.

After the first application use Wet & Forget as a maintenance tool. Re-apply at the first sign of re-growth. If an area is particularly bad, we suggest another application approximately one month from the first application. Vertical surfaces that don't have good exposure to the elements might require some assistance using either a water hose or a light brushing.