Wet & Forget Shower - FAQs|
How do I attach the remote sprayer?
Open flip cap and firmly insert (red or white) hose tip until it snaps into place. Once attached, fully extend the hose to 3 ft [36 in]. After each use turn sprayer nozzle to ‘OFF’ position and snap back into bottle handle to avoid leaks. Once trigger is connected store and transport in upright position.
My sprayer isn’t working.
Once the hose tip is snapped into place extend the hose 3 ft (36 inches). If the hose isn’t fully extend the entire 3 ft it will cause a kink and product will not properly flow through the hose into the sprayer.
Can I use Wet & Forget Shower to clean an already dirty shower?
Yes. For tough jobs spray Wet & Forget Shower on the surfaces that need cleaning. Let it sit overnight. Before your next shower, rinse the surface and give it a quick wipe-down. If the shower still needs additional attention, apply Wet & Forget Shower each day until clean. Once you’ve obtained a clean shower you can start your maintenance program of spraying the shower once a week. This will prevent the build-up of future soap scum, grime, oils, mold and mildew.
Can Wet & Forget Shower be safely used on any material?
We always recommend testing Wet & Forget Shower in an inconspicuous area prior to using. Wet & Forget Shower has been tested on ceramic, natural stone, chrome, brass, bronze, nickel, copper, acrylic, rubber, vinyl, stainless steel, granite, slate, glass tiles, cultured marble and fiberglass. Wet & Forget is not recommended for use on natural marble.
Can Wet & Forget Shower be used on shower curtains and shower door glass?
Yes. Wet & Forget Shower can be used on glass, plexiglass, vinyl, rubber, nylon and plastic.
Can Wet & Forget Shower be used on sinks, counters and other areas of the bathroom?
Yes. Apply Wet & Forget Shower. Let it sit for a few moments then rinse with clear water.
Does Wet & Forget Shower contain bleach?
No. Wet & Forget Shower was developed with soft chemistry. It doesn’t contain harsh or aggressive chemicals like bleach, ammonia, dyes or their irritating fumes.
Is Wet & Forget Shower safe for septic tanks?
Yes, it will not affect or interfere with the aerobic or anaerobic bacteria in your septic tank.
What are the active ingredients in Wet & Forget Shower?
Wet & Forget Shower contains two non-aggressive, proprietary non-ionic and cationic surfactants. One dissolves soap scum, and the other targets body oils. This combination gently goes to work, softening and eliminating soap scum and body oils and leaving behind a clean shower and a soothing scent. No scrubbing or wiping required!
Will Wet & Forget Shower remove mold from silicon or grout?
No. Wet & Forget Shower will remove surface mold and mildew stains, but not those permanently sealed in silicon or grout. For more stubborn stains use Wet & Forget Indoor—Coming Soon!
Will Wet & Forget Shower remove the build-up of soap scum and grime in my washing machine?
Yes. If your washing machine has a build-up of soap scum and grime, spray Wet & Forget Shower on the walls of the washing machine and inside the agitator if applicable. Leave overnight, and then run a short wash cycle to rinse the product off. Repeat if necessary up to 3 times. This will dissolve and wash away any build-up.
Will Wet & Forget Shower remove lime/calcium deposits caused by hard water?
We recommend cleaning lime/calcium deposits prior to using Wet & Forget Shower. Wet & Forget Shower cleans and prevents the build-up of soap scum, grime, oils, mold and mildew stains.
How long does it take Wet & Forget Shower to work?
Wet & Forget Shower gently goes to work on contact dissolving soap scum, grime and body oils. Tough jobs might require a wipe-down prior to your next shower to get the desired results. Wet & Forget Shower continues to clean and prevent new build-up over the next week. With regular weekly use, your shower will remain sparkling clean.